Product Category

ZR 011 Dual Thermostat Temperature thermostat controller for regulating

ZR 011 Dual Thermostat Temperature thermostat controller for regulating

Quantity:


Inquire Add to Basket

Model: ZR 011
Brand: NQQK

NO and NC in one casing

separate adjustable temperature

High switching capacity

Terminals easily accessible

Clip fixing

Two thermostats in one casing:

Thermostat(contact breaker,normally closed)for regulating heaters

Thermostat(contact make r,normally open)for regulating filter fans and heat exchange rs or
switching signal devices when temperatu re limit has been exceeded

Heaters and cooling equipment can be switched independently from each other with
a temperatu re offset as opposed to the usuaI change-over contacts

Technical Data:

Switch temperature difference	7K(±4k tolerance)
sensor element	termostatic bimetal
Contact type	snap-action contact
Contact resistance	<10m
service life	>10000cycles
max switching capacity	250VAC,10(2)A
	120VAC,15(2)A
	DC30W
EMC	acc.to en55014-1-2 EN61000-3-2 EN61000-3-3
connection	4-pole terminal for2.5mm2 RIgid wire 2.5mm2 standed wire(with wire end ferrule)2.5mm2
mounting	clip for 35mm DIN rail EN50022
casing	plastic according to UL94-V-0 light grey
Dimension	67x50x46mm
Weight	approx 90g
operating/storage temprature	-45 to +80°C (-49 to +176F)
fitting position	vertical
Protectiion type	IP20

Art. No	Seting range		Seting range
01172.0-00	contact breaker, normally closed	0 to +60 °C	contact maker, normally open	0 to +60 °C
01172.0-01	contact breaker, normally closed	-32 to +140°F	contact maker, normally open	-32 to +140°F
01175.0-00	contact breaker, normally closed	-10 to +50 °C	contact maker, normally open	-20 to +80 °C
01175.0-01	contact breaker, normally closed	-14 to +122°F	contact maker, normally open	-68 to +176°F
01176.0-00*	contact maker, normally open	0 to +60 °C	contact maker, normally open	0 to +60 °C
01176.0-01*	contact maker, normally open	-32 to +140°F	contact maker, normally open	-32 to +140°F